NRCP-5: Robotic Case Packer
NRCP-5: Robotic Case Packer
This highly flexible robotic cell combines the case erecting and case loading operation, while offering case sealing as an additional option. By utilizing a single robot design we greatly reduce total moving parts, increasing your reliability and maintainability, while maintaining a small footprint automatic case packer.
- 2 in 1 operation – erect and load on one frame
- Industrial robot – with multipurpose gripper
- Up to 5 cases per minute
- Tape or Glue Case Compatible
- Tool-less changeover – under 10 minutes
- Economic footprint
- Stainless Steel Frame STANDARD
- Heavy Payload capability, up to 100lbs
Specifications
Robot: Fanuc M10 articulating arm 6 axis robot
Drive
AC Motors (Conveyors)
Speed
NRCP-5: Up to 5 cases per minute
Case Size Range
Width: 5” (127mm) – 16” (405mm)
Height: 4” (100mm) – 16” (405mm)
Length: 6” (152mm) – 24” (610mm)
Adjustments
Hand knobs with position pointers and scales
Case Sealing
Single Tape Heads (2” or 3” tape) or “Nordson” Glue system.
Magazine Capacity
3 ft. (~120 cases), Second magazine available as an option
Frame
Stainless Steel
Guarding
Standard full length mesh with extruded anodized aluminum frames or polycarbonate with extruded anodized aluminum options.
Electrical
Omron PLC standard
Allen Bradley PLC optional.
Omron color touch screen HMI standard
Allen Bradley HMI optional.
NEMA 12 wiring and enclosures.
3-color stack-able warning lights.
Pneumatics
“FESTO” “SMC”
Installation Requirements
Power: 480 VAC/30 Amps. 3 phase, 50/60 Hz
Air: 90 PSI, 10 cfm.